전원 버튼 커넥터 헐거워 헤더에서 잘 빠지는 증상

커넥터 핀

 

 

 

컴퓨터 전원 스위치가 헤더에 꽉 끼지 않고 헐거워서 자주 빠지는 커넥터 접속 불량 증상, 커넥터 분리 후에 고정핀을 수리하는 방법입니다. 보통은 이렇게까지 수리하진 않고 교체하는 게 낫습니다. 여유분(부속)이 없을 때, 시도해볼 수 있을 거 같네요. 전원 버튼 외에는 다른 리셋 스위치나 LED는 없어도 컴퓨터 하는데 지장이 없으니, 전원 버튼 대신에 리셋 버튼을 연결하는 방법이 간단할 수 있습니다. 

 

 

 

 

https://m.blog.naver.com/dongtanpc/223205320507

컴퓨터 케이스 전원 버튼 커넥터가 헐거워서 잘 빠짐

---

The computer case power button connector may be loose. I plugged it in, but it keeps coming out, so the power switch may not work. In general, these initial defects are not common. In the computer industry where we test a lot, there are cases where the power button connectors for testing are often inserted and removed, and the connectors are loose.

 

​

 

​

 

​

 

​

 

The power connector is being disassembled. It's a plastic structure that holds the connector pin inside. If you lift the plastic, the pin comes out. (The wire is broken and only the head = the end remains.)

 

Disassembling the power switch.

 

​

 

​

 

​

 

​

 

As shown in the picture below, when you lift the plastic, the pin comes out of the hole.

 

Pin and Plastic Separation

 

​

 

​

 

A connector like the right awl is plugged into the pin, and if you plug it in several times, it will be more loose than when it was first made in the factory. As the pressed part unfolds, poor connection with the pins in the header may occur. (All connectors can have similar connectivity problems. One pin, such as the motherboard 24-pin connector, CPU auxiliary power supply 4-pin, 8-pin, graphics card 6-pin, 8-pin, etc., also has poor connection, and if the number of pins increases, more contacts should be checked. Cars are also likely to find connectivity problems where they are combined in this connector method, "because of rust, moisture, warpage, shock, etc." The symptoms are not constant and the occasional defect symptoms are sometimes bad connections. The computer may experience intermittent connection failures on all terminals, including memory connections, graphics card connections, sata terminals, and M.2 connector connections. In some cases, the symptoms of failure can be determined just by disassembling and reassembling, but we are also thinking of solving the problem of poor connection without knowing it.)

 

The process by which pins are inserted into the header (fangs instead of header pins)

 

​

 

I poked the loose connections with a needle to bend the metal inside. The pins on the header are a little tighter, so they won't come off easily.

 

I pressed the connecting part with a needle.

 

​

 

​

 

Put the pin in the plastic and push the plastic that holds the pin in to prevent it from falling out. The cable is broken, so it looks like that. The right side is the part that connects to the header pin on the motherboard, and the left side is the direction the cable comes out.

 

I put the pin back in the plastic and pressed the fixing pin.

 

​

 

The undissolved power button switch connector looks like the following.

 

Power button connector appearance