HP나 델은 모델마다 다르게 만들 수도 있어서, 참고만 하시고요. 직접 테스트를 해보고 연결하는 게 좋습니다.
https://blog.naver.com/dongtancomputer/222275450729
Usually, the front panel pin map of assembly computers is almost constant, but large companies' products are made a little differently. Even if it's from the same company, it's limited to the products below, but not all of them will be the same. It would be better to check each one and connect. LED lights don't have much to do with the operation, so even if you use the power button properly, it won't be a problem.
It was a request to change the case by bringing only the main board and accessories. Fortunately, you took the front panel cable apart and brought it. So I checked the port connected by following the cable connected to the power button.
I wrote the pin map in blue at first. I connected the power LED and HDD LED in reverse. The memo pad written in red later is correct. Please check below.
Before assembling, we are connecting the front panel line of the case to check if it works properly.
Here, I checked that the power LED and HDD LED were connected in reverse and rewritten.
I rewrote it as below and connected it normally and shipped it.
Only this model may look like this. Other models may be different.
NT350XCR-A58M 노트북 구경하기 (Take a look at your notebook) (0) | 2021.06.29 |
---|---|
13Z980 분해 (13Z980 disassembly) (0) | 2021.06.28 |
15UD50P-GX50K 둘러보기 (The external appearance) (0) | 2021.06.26 |
DM500A2J SSD 장착하기 (Upgrade) (0) | 2021.06.25 |
HP LAPTOP ELITEBOOK Intel XMM 7360 LTE-A (0) | 2021.06.24 |
댓글 영역